http://www.undocprint.org/winspool/spool_files
https://www.iterasi.net/Viewer.aspx?RootAssetID=889679

The following information is provided as is, and the authors take no responsibility for the correctness.

Table of Contents

Windows Spool Files

Windows Spool Files

Warning While you might use the informations you find here to extract EMF and other data from the Windows spoolfiles, you should remember, that this informations is undocumented and might change without prior notice!

"You can probably locate the information about the EMF structs in
the spool file format. But note that one major caveat with this
approach is that since the spool file format is MS proprietary, it
might change in future releases without notice. So if your driver
is dependent on a particular spool file format, it could break on
future releases. This is the reason for us recommending that you
not rely on the spool file format."
//Ashwin, Microsoft

Introduction

For each print job there are two spool files generated by the Windows NT/2000 spooler. One file with the .SHD extension for job settings, and one with the .SPL extension for the drawing commands.

EMF Microsoft® Enhanced Metafile Format

SPL Microsoft® Windows Spool File Format

SHD Microsoft® Windows Shadow File Format

How to set "Keep Printed Documents"

You can set “Keep Printed Documents” via registry, instead of using the printer control panel. Information about this on the Windows Spooler Registry page.

Printjob size restriction

The maximum size of a printjob on Windows is 4 gigabyte. Jobs that are bigger just drop the page data without any errors. It seems like the spooler just wraps around the internal spool data size counter, when reaching the maximum32bit value.

This size will be further limited if the disk does not have enough free space to store the spool file. When the spool file runs the disk out of space the printer often finishes the job by printing blank pages. No errors are recorded.

Reading job data

Access to the data of a SPL spool file, can be implemented quite easily from within a print processor.

To access the spool stream use the OpenPrinter function, where you specify “PrinterName,Job xxxx” for the pPrinterName parameter. The returned hPrinter handle can be used to read the job data via the ReadPrinter function.

If the printername is "Lexmark W820" and the JobId is 3, the string to be used would be "Lexmark W820,Job 3"

For more information on this see the SDK documentation for OpenPrinter and ReadPrinter.

Information about the SPL file format can be found here: SPL Files.

Comment by Microsoft:

I checked with our developers to find out if there is any change
in behavior as far as spooling of file is concerned in XP compared
to that of Win 2000. The change in XP is that it clears the spooled
file after sending the file to the printer. On the other hand in
Win 2000, the file is kept until the printer prints the file. For
this reason you are getting garbage reading in XP, but as you
mentioned that if you choose to keep the document in the spooler
"Keep printed document" in the Printer properties, it works.

This is a design change in XP behavior, not a bug.

Though the documents does not say that ReadPrinter should not be
called from the driver, the actual use of ReadPrinter is in the
print processor. Relying on reading the spooled file may cause
problem in later OSes. But developers still read the spooled file
to get specific information. The change in behavior in XP and Win
2003 caused problem to some third party print management programs.

The following article describes the problem you are seeing and
provides suggested workarounds:
http://support.microsoft.com/default.aspx?scid=kb;en-us;815913
Third-Party Print Management Program Does Not Work as Expected
After You Upgrade to Windows Server 2003 or Windows XP

In addition to the two workarounds you found, this article has
another workaround of creating and setting the
DisableServerFilePooling in
HKLM/System/CurrentControlSet/Control/Print reg_dword with
value greater than zero.

Comment by Christoph:

Contrary to Microsoft´s statement, that "ReadPrinter should not be
called from the driver", tests have showed, that it is possible to
use ReadPrinter from a printer driver. Only the ReadPrinter calls
should be done from DrvStartDoc. Remember to call
RevertToPrinterSelf!

Force JobID in Spoolfile names

On Windows NT/2000 find the files by name xxxxx.spl where xxxxx was the JobID returned by the EnumJobs API.

However, XP and 2003 create spool files named FPnnnnn.spl where nnnnn is no longer the JobID.

This is the side effect of file pooling. You can “turn off” Spool File Pooling by keeping printed jobs or specify a different spool directory. The workaround to this is as below:

To Turn Off Spool File Pooling on a Per Printer Queue-Basis

Click Start, click Run, type regedit in the Open box, and then click OK.

Locate the following registry subkey, where <printername> is the name of your printer: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers\<printername>

In the right pane, right-click SpoolDirectory, and then click Modify.

In the Value data box, type the location where you want the spool files to be stored. For example, type c:\windows\system32\spool\printers as the default location.

Quit Registry Editor.

Restart the Print Spooler service.

All new jobs will be of the form XXXXX.SPL and XXXXX.SHD and will be numbered consistently with their JobIDs.

To Turn Off Spool File Pooling for All Printers

Note: This method only works on Windows 2003 Server. This method does not work for Windows XP.

Click Start, click Run, type regedit in the Open box, and then click OK.

Locate the following registry subkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print

On the Edit menu, point to New, and then click DWORD Value.

In the New Value #1 box, type DisableServerFilePooling, and then press ENTER.

Right-click DisableServerFilePooling, and then click Modify.

In the Value data box, type 1 to turn off spool file pooling, and then click OK.

Quit Registry Editor.

Restart the Print Spooler service.

All new jobs will be of the form XXXXX.SPL and XXXXX.SHD and will be numbered consistently with their JobIDs.

When is RAW used?

A Print Processor must support the RAW data type or it simply won’t work. Beyond that, the data types it supports have little effect.

The decision on whether to spool EMF or RAW is made by GDI based on various factors.

Here are some of the factors:

Firstly, if the app uses the print APIs directly, it can specify whatever datatype it wants. But if the app prints through GDI:

We’ll go RAW in the following cases:

Printing to FILE:

Printing directly to port (no spooling)

Client disables “advanced printing features” in printer properties.

Some drivers always print RAW, regardless of all other options. e.g. “HP LaserJet 4100 PCL 6” from HP Homepage

Acrobat Reader prints PDFs to printers with a postscript driver as RAW postscript files.

Additionally, for networking printing:

Client is anything other than NT/Win200/XP

Client doesn’t use a “true” connection

Printing to a “masq” printer (win9x, netware, etc.)

Server has “printer attribute RAW only” bit set

Server doesn’t accept client’s EMF version

So there is no real guarantee that you will get on particular datatype or the other.

Make sure the PRINTER_ATTRIBUTE_DIRECT and PRINTER_ATTRIBUTE_RAW_ONLY attributes are not set for the printer.

Mimmo97 Blog

Saturday, November 7, 2009

Tuesday, October 27, 2009

Thursday, October 22, 2009

Thursday, October 15, 2009

Sunday, October 11, 2009

Monday, October 5, 2009

Tuesday, September 29, 2009

Saturday, September 26, 2009

Friday, September 25, 2009

Monday, September 21, 2009

Tuesday, September 15, 2009

Friday, September 11, 2009

Thursday, September 10, 2009

Saturday, September 5, 2009

Thursday, September 3, 2009

Maintaining and Changing the MAC Address of a Virtual Machine

Wednesday, September 2, 2009

Tuesday, September 1, 2009

MAGGIORI SITI E-COMMERCE ITALIANI

http://www.mediaworld.it/ - http://www.saturn.it/

MAGGIORI SITI "Shopping Comparison" ITALIANI

http://www.buycentral.it/ (http://www.pangora.com)

http://www.trovaprezzi.it/ http://www.shoppydoo.it/ (http://www.7pixel.it)

Vedere anche per la comparazione prezzi: http://www.google.com/search?hl=en&safe=off&client=opera&rls=en&tbo=1&num=100&newwindow=1&tbs=sts%3A1&q=%2B7Pixel+%2BPangora+%2Bbuycentral+%2Btrovaprezzi&btnG=Search&aq=f&oq=&aqi=

e questo (sempre per la comparazione prezzi): http://www.google.com/search?hl=en&safe=off&client=opera&rls=en&tbo=1&num=100&newwindow=1&tbs=sts%3A1&q=%2BKelkoo+%2B7Pixel+%2BPangora&btnG=Search&aq=f&oq=&aqi=

Monday, August 31, 2009

Saturday, August 29, 2009

Friday, August 28, 2009

Friday, August 21, 2009

Wednesday, August 19, 2009

Tuesday, August 18, 2009

Monday, August 17, 2009

Saturday, August 15, 2009

Friday, August 14, 2009

Wednesday, August 12, 2009

Tuesday, August 11, 2009

Friday, July 31, 2009

Wednesday, July 29, 2009

Monday, July 27, 2009

Friday, July 24, 2009

Thursday, July 23, 2009

Monday, July 20, 2009

How to Verify if an Endpoint Client has Automatically Excluded an Application or Directory

How to manually uninstall Symantec Endpoint Protection client from Windows Vista 32-bit

How to manually uninstall Symantec Endpoint Protection client from Windows 2000, XP and 2003, 32-bit Editions

Monday, July 13, 2009

Tuesday, June 23, 2009

How to Get SVS or SWV ? Where to Download SVS 2.1, and SWV 6.1 !

Thursday, June 11, 2009

SimpleModal

Friday, June 5, 2009

SysTracer - Track system changes and find modified files and registry

Terminazione forzata di un processo

ZeroWave: un TaskManager potenziato

Monday, April 6, 2009

Saturday, April 4, 2009

Wednesday, April 1, 2009

Microsoft .NET Framework 3.5 in Windows 2000

Wednesday, March 18, 2009

Monday, March 9, 2009

Friday, February 27, 2009

Thursday, February 26, 2009

Wednesday, February 25, 2009

Tuesday, February 24, 2009